Dear Student, Resident, Homeowner

Below is explained how you can connect the access point or “WiFi box” you ordered for use within the Wifibri wired network, in order to create a wireless signal within the room / studio / apartment.


Requirements for connecting a device:

  • Wifibri installed on the room / apartment
  • Wired internet
  • The ordered access point

Identify the received WiFi Box? 

Which WiFi device did you receive? Click on the picture.

Mikrotik hAP MiniMikrotik hAP Lite
3 ethernet ports Black / Orange4 ethernet ports Blue / White

If you have received a device other than these two devices already mentioned, please contact the wifibri helpdesk on +32 9 222 89 62 or helpdesk@wifibri.be

Mikrotik hAP Mini


In the box

  • 1 box
  • 1 hAP mini, 
  • 1 power cable
  • 1 Ethernet cable 1 meter

Configuration

Pay attention! This device is already preconfigured, nothing more needs to be done with it and you can connect to it immediately. more about this further


Connecting

Pay attention! images are for reference only. The real situation can be different

First, plug the network cable that comes with the WiFi box into the wall socket or if there is a fixed cable, use that one instead.

Then you connect the ethernet cable to the “Wifi box”. You do this by clicking the ethernet cable on one of the ethernet ports. You plug the power cable into the wall socket and then into the device on the provided micro USB port. If everything is OK, the link light on the corresponding port will turn on / flash.


Connection with wifi

After the “wifi box” is connected, it will broadcast wifi, the credentials of the wifi are:

  • SSID 1: Wifibri
  • Password: wifibri account login and password
  • SSID 2: Wifibri public
  • password: No password

Mikrotik hAP Lite


In the box

  • 1 box
  • 1 hAP Lite, 
  • 1 powercable
  • 1 Ethernet cable 1 meter

Configuration

Pay attention! This device is already preconfigured, nothing more needs to be done with it and you can connect to it immediately. more about this further


Connecting

Pay attention! images are for reference only. The real situation can be different

First, plug the network cable that comes with the WiFi box into the wall socket or if there is a fixed cable, use that one instead.

Then you connect the ethernet cable to the “Wifi box”. You do this by clicking the ethernet cable on one of the ethernet ports. You plug the power cable into the wall socket and then into the device on the provided micro USB port. If everything is OK, the link light on the corresponding port will turn on / flash.


Connection with wifi

After the “wifi box” is connected, it will broadcast wifi, the credentials of the wifi are:

  • SSID 1: Wifibri
  • Password: wifibri account login and password
  • SSID 2: Wifibri public
  • password: No password